What I'm Comparing and Why
I handle purchasing for a company of about 140 people — three field crews, a workshop, and roughly $180,000 of annual spend on equipment. Most of that goes to tools. And for the last three years, one decision keeps coming back around: buy a combo kit like the Porter-Cable 8-tool combo kit, or buy tools one at a time as we need them?
My instinct, the first time I ran this comparison, was to buy individually. Why? You buy exactly what the team needs, skip what you don't, and stay flexible on suppliers. (Which, honestly, is a real advantage when you're managing vendor relationships.)
That's not how it worked out. Three years in, I've mostly reversed my position — but not as completely as I initially assumed. Here's the comparison, broken into the four dimensions that actually affected the outcome.
Dimension 1: Price — Is the Combo Kit Actually Cheaper?
The most direct comparison is sticker price. And I'll say this clearly: a combo kit, priced per tool, is almost always cheaper than buying the same tools individually. I've run this comparison three times; every official supplier quote confirms it. An 8-tool kit typically costs less than buying the four most-used tools plus a decent battery pack individually.
But whether the kit actually saves you money depends on a second question: how many of those tools will you actually use? If three of the eight sit in a drawer, you're not saving — you're spending under a different label. (It's hoarding logic, except the manufacturer made the hoarding decision for you.)
Single-tool purchasing wins on the other side of the same equation: you pay a higher unit price, but there's no sunk cost. For a team with modest usage, that point matters more than the kit discount — it's not "cheaper," it's "less waste."
The kit saves you unit price. Single-tool buying saves you opportunity cost. Those are different columns in the ledger, and one doesn't cancel out the other.
Dimension 2: The Battery System — The Variable Most People Miss
This is where my comparison flipped.
When you buy individual tools, you tend to underestimate one hidden cost: batteries and chargers. Each tool bought separately needs its own battery — or at minimum, a compatible battery pack. The tool looks cheap; the battery is where the money goes.
The reverse causation is worth saying plainly: people assume combo kits are cheaper because the per-tool price is lower. In reality, the per-tool price is lower and the kit bundles a battery platform you'd otherwise be paying for separately. The real value isn't the tools — it's the battery and charger system.
Porter-Cable's tools run on a unified battery platform, and that platform shows up most clearly inside combo kits. An 8-tool kit typically ships with one or two batteries and a dual-port charger — meaning you go from nothing to working immediately. Buy individual tools and you have to choose: a battery per tool (expensive) or a shared battery set (complicated).
For a team starting from zero, this dimension basically decides the question — kit wins. For a team that already has a battery platform in place, the extra batteries in a kit are dead weight, and single-tool buying is cleaner.
(One detail worth being explicit about: kit pricing often counts chargers and batteries as "value." But if you already own a charger, that value is zero to you. I got excited about that number in year one before I figured out the arithmetic.)
Dimension 3: What the Combo Kit Doesn't Include
The most misunderstood thing about combo kits is the assumption that they're complete. They're not. Some items never ship in a kit — they need to be bought separately, and they need to be on the procurement list from day one.
Replacement Parts and Consumables
Take the strap wrench replacement strap for our workshop's strap wrench. That's a consumable. It doesn't come in a kit; when it wears out, you buy it separately. Any tool with replaceable or consumable parts — procurement should ask three questions upfront: how are the parts sourced, is there stock, and should this be on a recurring reorder cycle?
We got burned on this in year one. A strap wrench replacement strap went out of stock, and the repair team waited two weeks for a new one. That tool sat idle the entire time. The lost labor hours cost more than what we saved on the initial purchase. (Still learning this lesson: consumables aren't just their purchase price — you have to factor in downtime.)
Buying a Cordless Jigsaw Individually
Here's where individual purchasing genuinely makes sense. If the team already has Porter-Cable batteries, a Porter-Cable cordless jigsaw bought individually is a good call — it's a tool you need, at a higher unit price, but you're reusing the battery platform you already paid for.
If you're starting from scratch, though, an individually purchased jigsaw has to bear the battery and charger cost, and the total climbs past the equivalent kit price. So the jigsaw question isn't about the jigsaw — it's about whether the platform already exists.
Dimension 4: Where the Comparison Stops Working
The last dimension is the one where neither side of the comparison helps — the territory outside the kit-vs-individual framework.
Used Equipment: The Welder Example
Our workshop's welder has been in service for six years, and we've been looking at a replacement. That's not a kit question, and it's not a single-tool question — a used welder is a separate procurement path.
Buying used can run you half or less of new pricing, but the risks are real: no reliable history of workload, no visibility into internal wear, and warranty coverage is often nonexistent. My rule: for equipment that bears load, holds pressure, or generates heat, used is acceptable — but someone actually qualified has to inspect it, and the paperwork has to be clean. Procurement's job here isn't judging the equipment; it's making sure inspection, invoicing, and warranty documentation don't disappear.
Operating Knowledge Isn't a Procurement Line Item
Some problems aren't solved by what you buy. Which way does the angle grinder blade go, for example — get that wrong and you're looking at a blade that won't cut at best, or a fragment flying at worst. Neither a combo kit nor an individual purchase tells you that. That's a training issue.
What procurement can do is ensure that the tools come with complete operating guides and that someone on-site has actually read them. This doesn't look like procurement's concern — but it will be, the moment there's an incident and the first question is how the tool was bought and whether the safety documentation exists.
So Which Path Should You Take?
My recommendation now depends on the scenario, not the brand.
- Starting from zero, team covers three or more trades: buy the kit. The reason isn't the per-tool discount — it's the battery platform, charger, and tool completeness arriving together.
- Already have Porter-Cable batteries and core tools: buy individually. The extra batteries in the kit are dead weight for you; the savings are better spent on the one tool you actually need.
- Consumables and replacement parts: always buy separately, and build a recurring reorder list so you're not stuck waiting when something fails.
- Used equipment (welders, large stationary tools): viable, provided someone inspects it, you get clean invoicing, and there's traceable warranty documentation.
- Operating safety knowledge: this is a training budget line, not a tool budget line — but procurement should still check that safety documentation and operating guides are part of the delivery.
Three years ago, I thought this comparison had a correct answer. It doesn't. There's only "the right answer for this specific team" — the kit isn't inherently smarter, and individual buying isn't inherently more flexible. It depends on who's using the tools, what platform already exists, and how much downtime the operation can absorb.
(If I could leave you with a single rule: ignore per-tool pricing. Watch two numbers instead — how many of the kit's tools you'll actually use, and the downtime cost of a failed replacement part. The first tells you whether the kit is worth it; the second tells you how to buy consumables.)
Leave a Reply